Lehrstuhl für Photonische Technologien
Konrad-Zuse-Straße 3-5
91052 Erlangen

Tel:  (+49) 09131 85-23456
Fax: (+49) 09131 85-23234
Email: michael.schmidt@lpt.uni-erlangen.de

Raum: 02.045

Prof. Schmidt wurde 1969 in Coburg geboren und nahm 1989 ein Studium der Elektrotechnik mit Fachrichtung Mikroelektronik und Informatik an der Friedrich-Alexander-Universität Erlangen-Nürnberg auf. Ab 1997 war er als wissenschaftlicher Mitarbeiter im Bereich der Laserstrahl-Mikrotechnik des Lehrstuhls für Fertigungstechnologie an der Universität Erlangen tätig, bevor er 2001 als Bereichsleiter Entwicklung/Fertigung an das Bayerische Laserzentrum wechselte. Im Jahr 2002 schloss Prof. Schmidt seine Promotion zum Thema „Prozessregelung für das Laserstrahl-Punktschweißen in der Elektronikproduktion” ab und wurde danach als Prokurist Mitglied der Geschäftsleitung des Bayerischen Laserzentrums. Seit Januar 2005 ist Prof. Schmidt Geschäftsführer des Bayerischen Laserzentrums und seit März 2009 Ordinarius des neu gegründeten Lehrstuhls für Photonische Technologien.

Prof. Schmidt ist in verschiedenen internationale und nationalen Arbeitskreisen und Gremien aktiv:

​International:

• Mega Grant (Presidential Grant) in Russia: Build up a laboratory on Additive Technology with KAI – Kazan University (seit 2014)
• INO – Institute National d’Optique, Québec, Canada:
  • ​Associate Researcher (seit 2011) 
  • Member of R&D Advisory Committee (seit 2011)
• Laser Demonstration Center (LDC), Sankt Petersburg: Advisory board (seit 2009)
• CIRP Internationale Academy für Produktionstechnik:
  • Chairman Collaborative Working Group: Laser in Production (2013 – 2015)
  • STC-E: Secretary (2013 – 2016)
  • STC-E: Vice Chairman (seit 2016)
  • Associate member (2014 – 2017)
• LIA Laser Institute of America:
  • Program committee ICALEO: Laser-Micro-Fabrication – conference
  • Member of the Board of Directors (2010 – 2012; 2014 – 2016; 2017 – 2019)
• SPIE: The international society for optics and photonics:
  • Student Chapter in University of Erlangen-Nürnberg: Advisor (seit 2011)
• Journal of Laser Micro and Nanoengineering (JLMN):  Editor (seit 2012)
• International Journal of Optomechatronics: Associate Editor (seit 2010)
• Journal Optics and Laser Technology:
  • Associate Editor (2015 – 2016), ​Receiving Editor (seit 2016)
• LPM Laser Precision Microfabrication conference of JLPS Japan Laser processing Society: Program committee (seit 2011)
• CLEO Conference on Lasers and Electro-Optics: Program committee  (Applications & Technology 04: Industrial subcommittee) (seit 2012)
• ISEM-XVII – International Symposium for Electro-Machining: Scientific Committee (seit 2012)
• Annual International Conference of RAPDASA, the Rapid Product Development Association of South Africa: Organizing committee (2014, 2016)
• VRAP International Conference on Advanced Research in Virtual and Rapid Prototyping: Scientific committee (2015)
• IAMA International Additive Manufacturing Award 2016: Member of the jury (2016)​

National:

• SAOT – Graduate School in Advanced Optical Technologies in der Exzellenzinitiative der DFG (Deutsche Forschungsgemeinschaft)
  • Co-Coordinator: 2010 – 09/2013
  • Coordinator: seit 10/2013
• WLT Wissenschaftliche Gesellschaft Lasertechnik e. V. (AG Ing.)
  • Präsident der WLT (seit 2017)
  • LiM Konferenz: General chair 2011, sub-chair (2009, 2013)
• bayern photonics e.V., München: Vorstandsvorsitzender (seit 2007)
• Group “networking research”, Bavaria: Vice chairman (seit 2012)
• BFS: Bayerische Forschungsstiftung:
  • ForNextGen: Collaborative Research Project: Chairman (seit 2014)
• Förder- und Freundeskreis zum weiteren Ausbau der Lasertechnologie an der Friedrich-Alexander-Universität Erlangen-Nürnberg: Member
• LANE – Laser Assisted Net Shape Engineering Conference:
  • Organizer / Chairman (seit 2007)
• EDPC-Conference: International Conference Committee (seit 2012)
• IWOTE 2017 – 5th International Workshop on Thermal Forming and Welding Distortion: Advisory committee  ​

Veröffentlichungen:

2018

• Häfner T, Strauß J, Roider C, Heberle J, Schmidt M:
  Tailored laser beam shaping for efficient and accurate microstructuring
  In: Applied Physics A: Materials Science and Processing (2018)
  DOI: 10.1007/s00339-017-1530-0
  URL: https://link.springer.com/article/10.1007/s00339-017-1530-0
• Mehari FA, Lengenfelder B, Figura R, Klämpfl F, Schmidt M:
  LIBS based Tissue Differentiation for Er:YAG Surgical Laser
  (2018)
  DOI: 10.5220/0006637402470251
  URL: http://www.scitepress.org/DigitalLibrary/PublicationsDetail.aspx?ID=EZ8vL8gRKLw=&t=1
• Shih CY, Streubel R, Heberle J, Letzel A, Shugaev MV, Wu C, Schmidt M, Gökce B, Barcikowski S, Zhigilei LV:
  Two mechanisms of nanoparticle generation in picosecond laser ablation in liquids: the origin of the bimodal size distribution
  In: Nanoscale (2018)
  DOI: 10.1039/c7nr08614h
• Sun B, Salter P, Roider C, Jesacher A, Strauß J, Heberle J, Schmidt M, Booth MJ:
  Four-dimensional light shaping: manipulating ultrafast spatiotemporal foci in space and time
  In: Light: Science & Applications (2018)
  DOI: 10.1038/lsa.2017.117
  URL: https://www.nature.com/articles/lsa2017117
• Tenner J, Häfner T, Rothammer B, Krachenfels K, Zhao R, Schmidt M, Tremmel S, Merklein M:
  Influence of laser generated micro textured coated tool surfaces on dry deep drawing processes
  In: Dry Metal Forming Open Access Journal (2018), p. 35 - 46
  URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5a869448addd0

2017

• Alexeev I, Wu J, Karg M, Zalevsky Z, Schmidt M:
  Determination of laser beam focus position based on secondary speckles pattern analysis
  In: Applied Optics (2017), p. 7413-7418
  DOI: 10.1364/AO.56.007413
• Butzhammer L, Dubjella P, Huber F, Schaub A, Aumüller M, Baum A, Petrunenko O, Merklein M, Schmidt M:
  Experimental investigation of a process chain combining sheet metal bending and laser beam melting of Ti-6Al-4V
  (2017)
• Chen C, Fei Y, Zhou Q, Gong Y, Li R, Li C, Klämpfl F, Freund S, Wu X, Sun Y, Li X, Schmidt M, Ma D, Yu Y:
  Laser beam melting 3D printing of Ti6Al4V based porous structured dental implants: fabrication, biocompatibility analysis and photoelastic study
  In: Scientific Reports (2017)
  DOI: 10.1038/srep45360
  URL: http://www.nature.com/articles/srep45360
• Gausemeier J, Schmidt M, Anderl R, Schmid HJ, Leyens C, Seliger G, Winzer P, Straube F, Kohlhuber M, Kage M, Karg M:
  Additive Fertigung
  München: acatech – Deutsche Akademie der Technikwissenschaften, Nationale Akademie der Wissenschaften, 2017
  ISBN: 978-3-8047-3676-4
  URL: http://www.acatech.de/de/aktuelles-presse/presseinformationen-news/news-detail/artikel/akademien-legen-handlungsempfehlungen-zur-additiven-fertigung-vor.html
• Heberle J, Knoll M, Häfner T, Schmidt M:
  High-speed pump-probe imaging of ultrashort pulsed laser cutting of polymers
  In: Journal of Laser Applications (2017)
  DOI: 10.2351/1.4983500
• Huber F, Rasch M, Butzhammer L, Karg M, Schmidt M:
  Strahlschmelzen von Metallen mit unterschiedlichen Intensitäten und Belichtungsstrategien
  (2017)
• Häfner T, Heberle J, Hautmann H, Zhao R, Tenner J, Tremmel S, Merklein M, Schmidt M:
  Effect of picosecond laser based modifications of amorphous carbon coatings on lubricant-free tribological systems
  In: Journal of Laser Micro Nanoengineering (2017), p. 132-140
  DOI: 10.2961/jlmn.2017.02.0015
• Häfner T, Heberle J, Holder D, Schmidt M:
  Speckle reduction techniques in holographic beam shaping for accurate and efficient picosecond laser structuring
  In: Journal of Laser Applications (2017), p. 022205
  DOI: 10.2351/1.4983497
• Karg M, Ahuja B, Wiesenmayer S, Kuryntsev S, Schmidt M:
  Effects of process conditions on mechanical behavior of aluminium wrought alloy EN AW-2219 (AlCu6Mn) additively manufactured by Laser Beam Melting in powder bed
  In: Micromachines (2017), p. 1-11
  DOI: doi:10.3390/mi8010023
  URL: http://www.mdpi.com/2072-666X/8/1/23/pdf
• Lengenfelder B, Mehari FA, Tang Y, Klämpfl F, Zalevsky Z, Schmidt M:
  Towards non-contact photo-acoustic endoscopy using speckle pattern analysis
  (2017)
  DOI: 10.1117/12.2250563
  URL: http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=2608814
• Mehari FA, Geißler B, Rohde M, Klämpfl F, Stelzle F, Schmidt M:
  Laser-induced Breakdown Spectroscopy (LIBS) based tissue type mapping of ex-vivo soft tissues - A prospect for tissue specific Laser surgery
  (2017)
• Mikschl F, Merle B, Baum M, Heberle J, Göken M, Schmidt M:
  Micromechanical characterization of laser consolidated nanoparticle ITO layers
  In: Thin Solid Films (2017), p. 214-218
  DOI: 10.1016/j.tsf.2017.09.046
  URL: http://www.sciencedirect.com/science/article/pii/S0040609017307265
• Rasch M, Huber F, Butzhammer L, Merz C, Schmidt M:
  Einfluss der Belichtungsstrategie auf die oberflächennahe Porosität beim Laserstrahlschmelzen im Pulverbett
  Carl Hanser Verlag GmbH & Co. KG
  (2017)
  DOI: 10.3139/9783446454606.019
  URL: http://www.hanser-elibrary.com/doi/pdf/10.3139/9783446454606.019
• Schmidt M, Gausemeier J, Leyens C, Anderl R, Winzer P, Schmid HJ, Seliger G, Straube F, Kohlhuber M, Kage M, Karg M:
  Additive Manufacturing
  München: acatech – Natonal Academy of Science and Engineering (lead insttuton) acatech Ofce: Karolinenplatz 4, 80333 München German Natonal Academy of Sciences Leopoldina Jägerberg 1, 06108 Halle (Saale) Union of the German Academies of Sciences and Humanites Geschwister-Scholl-Straße 2, 55131 Mainz, 2017
  ISBN: 978-3-8047-3677-1
  URL: http://www.acatech.de/fileadmin/user_upload/Baumstruktur_nach_Website/Acatech/root/de/Publikationen/Kooperationspublikationen/3Akad_Stellungnahme_EN_AdditiveFertigung_web_FINAL.pdf
• Stein S, Wedler J, Rhein S, Schmidt M, Körner C, Michaelis A, Gebhardt S:
  A process chain for integrating piezoelectric transducers into aluminum die castings to generate smart lightweight structures
  In: Results in Physics (2017)
  DOI: 10.1016/j.rinp.2017.07.034
• Stelzle F, Rohde M, Riemann M, Oetter N, Adler W, Tangermann-Gerk K, Schmidt M, Knipfer C:
  Autofluorescence spectroscopy for nerve-sparing laser surgery of the head and neck-the influence of laser-tissue interaction
  In: Lasers in Medical Science (2017), p. 1289-1300
  DOI: 10.1007/s10103-017-2240-8
• Strauß J, Baum M, Alexeev I, Schmidt M:
  Optical Trap Assisted Nanopatterning: Process Parallelization and Dynamic Structure Generation
  In: Journal of Laser Micro Nanoengineering (2017), p. 86-90
  DOI: DOI: 10.2961/jlmn.2017.02.0007
  URL: http://www.jlps.gr.jp/jlmn/upload/267828b35a4a05b6fd4d0589b6b25a1c.pdf
• Tenner F, Regensburger M, Schramm A, Söhle M, Schwarzkopf K, Zalevsky Z, Schmidt M:
  Evaluation of a laser-based sensor for the diagnosis of neurological disorders
  (2017)
  DOI: 10.1109/EMBC.2017.8037790
• Tenner F, Riegel D, Mayer E, Schmidt M:
  Analytical model of the laser welding of zinc-coated steel sheets by the aid of videography
  In: Journal of Laser Applications (2017), p. 022411
  DOI: 10.2351/1.4983236
• Tenner J, Häfner T, Zhao R, Andreas K, Schmidt M, Tremmel S, Merklein M:
  Analysis of tool-sided surface modifications for dry deep drawing of deep drawing steel and aluminum alloys in a model process.
  In: Dry Metal Forming Open Access Journal (2017), p. 30-40

2016

• Ahuja B, Schaub A, Junker D, Karg M, Tenner F, Plettke R, Merklein M, Schmidt M:
  A ROUND ROBIN STUDY FOR LASER BEAM MELTING IN METAL POWDER BED
  In: South African Journal of Industrial Engineering (2016), p. 30-42
  DOI: doi: 10.7166/27-2-1201
  URL: http://sajie.journals.ac.za/pub/article/view/1201/682
• Alexeev I, Brehm E, Nendel F, Strauß J, Baum M, Schmidt M:
  Fabrication and Application of Phase only Holograms for High Power Laser Beam Shaping
  In: Journal of Laser Micro Nanoengineering (2016), p. 261-265
  DOI: 10.2961/jlmn.2016.02.0019
• Chen C, Ahmed M, Häfner T, Klämpfl F, Stelzle F, Schmidt M:
  Fabrication of a turbid optofluidic phantom device with tunable µa and μ s’ to simulate cutaneous vascular perfusion
  In: Scientific Reports (2016)
  DOI: 10.1038/srep30567
  URL: http://www.nature.com/articles/srep30567
• Heberle J, Bechtold P, Strauß J, Schmidt M:
  Electro-optic and acousto-optic laser beam scanners
  SPIE
  Bellingham, WA (2016)
  DOI: 10.1117/12.2212208
• Heberle J, Häfner T, Schmidt M:
  Nonlinear Absorption Measurements of Intraocular Lens Polymers by Integrating Z-scan
  In: Journal of Laser Applications (2016), p. 0226041-0226046
  DOI: 10.2351/1.4944116
• Häfner T, Heberle J, Dobler M, Schmidt M:
  Influences on Incubation in ps Laser Micro-machining of Steel Alloys
  In: Journal of Laser Applications (2016), p. 0226051-0226056
  DOI: 10.2351/1.4944445
  URL: http://lia.scitation.org/doi/abs/10.2351/1.4944445?journalCode=jla
• Karg M, Ahuja B, Schmidt J, Winzer B, Wirth KE, Peukert W, Schmidt M:
  Laser Beam Melting in Powder Bed of nonspherical aluminium microparticles dry coated with metal nanoparticles
  Interesansa - zavod
  Ljubljana (2016)
  URL: http://icat.si
• Karg M, Hentschel O, Ahuja B, Junker D, Haßler U, Schäperkötter C, Haimerl A, Arnet H, Merklein M, Schmidt M:
  Comparison of process characteristics and resulting microstructures of maraging steel 1.2709 in Additive Manufacturing via Laser Metal Deposition and Laser Beam Melting in Powder Bed
  Interesansa - zavod
  Ljubljana (2016)
  URL: http://icat.si/
• Kolb T, Urban N, Huber F, Brela M, Maurer D, Akbulut B, Donocik C, Schmidt M, Franke J:
  Laser Beam Melting Of NdFeB For The Production Of Rare-Earth Magnets
  Proceedings of the 6th Electric Drives Production Conference
  2016
• Laukart A, Kohl S, Fritsche H, Grohe A, Kruschke B, Schmidt M:
  Experimental and Numerical Investigations of Laser Beam Welding with an Ultra-high Brightness Direct-diode Laser
  In: Physics Procedia (2016), p. 1397–1403
  DOI: dx.doi.org/10.1016/j.phpro.2016.08.146
• Launhardt M, Wörz A, Loderer A, Laumer T, Drummer D, Hausotte T, Schmidt M:
  Detecting surface roughness on SLS parts with various measuring techniques
  In: Polymer Testing (2016), p. 217–226
  DOI: 10.1016/j.polymertesting.2016.05.022
• Lengenfelder B, Mehari FA, Hoppe L, Klämpfl F, Tenner F, Zalevsky Z, Schmidt M:
  Remote photoacoustic tomography using speckle-sensing with a high-speed camera
  (2016)
  DOI: 10.1364/CANCER.2016.JM3A.16
  URL: https://www.osapublishing.org/abstract.cfm?URI=Cancer-2016-JM3A.16
• Mehari FA, Rohde M, Kanawade R, Knipfer C, Adler W, Klämpfl F, Stelzle F, Schmidt M:
  Investigation of the differentiation of ex vivo nerve and fat tissues using laser-induced breakdown spectroscopy (LIBS): Prospects for tissue-specific laser surgery
  In: Journal of Biophotonics (2016)
  URL: http://onlinelibrary.wiley.com/doi/10.1002/jbio.201500256/abstract
• Mehari FA, Rohde M, Knipfer C, Kanawade R, Klämpfl F, Adler W, Oetter N, Stelzle F, Schmidt M:
  Investigation of Laser Induced Breakdown Spectroscopy (LIBS) for the Differentiation of Nerve and Gland Tissue—A Possible Application for a Laser Surgery Feedback Control Mechanism
  In: Plasma Science & Technology (2016), p. 654
  URL: http://iopscience.iop.org/article/10.1088/1009-0630/18/6/12/pdf
• Merklein M, Dubjella P, Schaub A, Butzhammer L, Schmidt M:
  Interaction of Additive Manufacturing and Forming
  (2016)
• Merklein M, Schmidt M, Tremmel S, Andreas K, Häfner T, Zhao R, Steiner J:
  Tailored modifications of amorphous carbon based coatings for dry deep drawing
  In: Dry Metal Forming Open Access Journal (2016), p. 25-39
• Mikschl F, Baum M, Schmidt M:
  Innovative Strategies for the Removal of Organic Compounds in Nanoparticle ITO Layers
  Journal of Laser Micro/Nanoengineering, 2016
  DOI: 10.2961/jlmn.2016.01.0023
  URL: http://www.jlps.gr.jp/jlmn/upload/07ad0611042609e5e2758fc7fbb2faba.pdf
• Neukam FW, Adler W, Rohde M, Klämpfl F, Schmidt M, Mehari FA, Stelzle F:
  The differentiation of oral soft- and hard tissues using laser induced breakdown spectroscopy – a prospect for tissue specific laser surgery
  In: Journal of Biophotonics (2016), p. 1250-1261
  DOI: 10.1002/jbio.201600153
  URL: http://onlinelibrary.wiley.com/doi/10.1002/jbio.201600153/pdf
• Rapp S, Kaiser M, Schmidt M, Huber H:
  Ultrafast pump-probe ellipsometry setup for the measurement of transient optical properties during laser ablation
  In: Optics Express (2016), p. 17572-17592
  DOI: 10.1364/OE.24.017572
  URL: http://www.opticsexpress.org/abstract.cfm?URI=oe-24-16-17572
• Schaub A, Ahuja B, Butzhammer L, Osterziel J, Schmidt M, Merklein M:
  Additive Manufacturing of Functional Elements on Sheet Metal
  In: Physics Procedia (2016), p. 797-807
  DOI: 10.1016/j.phpro.2016.08.082
  URL: http://www.sciencedirect.com/science/article/pii/S1875389216301894
• Scheitler C, Rothfelder R, Rasch M, Ahuja B, Schmidt M, Merklein C, Beer O:
  Laser beam melting of M50NiL: Influence of inert gas flow on resulting part properties
  (2016)
• Shahmoon A, Strauß J, Zafri H, Schmidt M, Zalevsky Z:
  High Resolution Fabrication of Interconnection Lines Using Picosecond Laser and Controlled Deposition of Gold Nanoparticles
  In: Physics Procedia (2016), p. 188-193
  DOI: doi.org/10.1016/j.phpro.2016.08.153
• Staudt T, Tenner F, Klämpfl F, Schmidt M:
  Development of a hyperspectral imaging technique for monitoring laser-based material processing
  Proceedings of the 35th International Congress on Applications of Lasers & Electro-Optics - ICALEO
  2016
• Stein S, Heberle J, Suchy M, Tenner F, Hugger F, Roth S, Schmidt M:
  High Temperature Laser Based Drop on Demand Micro Joining of Thin Metallic Layers or Foils using Bronze Braze Preforms
  In: Journal of Laser Micro Nanoengineering (2016), p. 111-116
  DOI: 10.2961/jlmn.2016.01.0021
  URL: http://www.jlps.gr.jp/jlmn/upload/2633dd44a74cc80a417d9c07831e60ca.pdf
• Strauß J, Häfner T, Dobler M, Heberle J, Schmidt M:
  Evaluation and Calibration of LCoS SLM for Direct Laser Structuring with Tailored Intensity Distributions
  In: Physics Procedia (2016), p. 1160-1169
  DOI: 10.1016/j.phpro.2016.08.122
  URL: http://www.sciencedirect.com/science/article/pii/S1875389216302292
• Strauß J, Vorndran M, Heberle J, Schmidt M:
  IFTA Calculation of Frequency Patterns for Acousto Optical Laser Beam Shaping
  (2016)
• Tenner F, Klämpfl F, Nagulin K, Schmidt M:
  Evaluation of process observation features for laser metal welding
  In: Optics and Laser Technology (2016), p. 77 - 83
  DOI: 10.1016/j.optlastec.2015.12.012
• Tenner F, Ramoser S, Dobler M, Zalevsky Z, Schmidt M:
  Optical Measurement of the Connection State in Laser Brazing
  In: Physics Procedia (2016), p. 1233--1243
  DOI: 10.1016/j.phpro.2016.08.130
• Tenner F, Riegel D, Mayer E, Schmidt M:
  Analytical Model of the Laser Welding of Zinc-coated Steel Sheets by the Aid of Videography
  (2016)
• Tenner F, Schramm A, Söhle M, Regensburger M, Wirthmann E, Zalevsky Z, Schmidt M:
  Towards a multi-sensor system for the diagnosis of neurological disorders
  (2016)
  DOI: 10.1109/AIM.2016.7576816
• Wegener CM, Spiehl D, Sauer HM, Mikschl F, Liu X, Kölpin N, Schmidt M, Jank M, Dörsam E, Roosen A:
  Flexographic printing of nanoparticulate tin-doped indium oxide inks on PET foils and glass substrates
  In: Journal of Materials Science (2016)
  DOI: DOI 10.1007/s10853-016-9772-3

2015

• Abraham C, Beiderman Y, Ozana N, Tenner F, Schmidt M, Sanz M, Garcia J, Zalevsky Z:
  Photonic non-contact estimation of blood lactate level
  In: Biomedical Optics Express (2015), p. 4144
  DOI: 10.1364/BOE.6.004144
• Ahuja B, Karg M, Schmidt M:
  Additive Manufacturing in Production – Challenges and Opportunities
  (2015)
  DOI: 10.1117/12.2082521
  URL: http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=2208227&resultClick=1
• Ahuja B, Schaub A, Karg M, Schmidt R, Merklein M, Schmidt M:
  High Power Laser Beam Melting of Ti-6Al-4V on Formed Sheet Metal to achieve Hybrid structures
  (2015)
  DOI: 10.1117/12.2082919
  URL: http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=2208237&resultClick=1
• Alexeev I, Heberle J, Cvecek K, Nagulin K, Schmidt M:
  High Speed Pump-Probe Apparatus for Observation of Transitional Effects in Ultrafast Laser Micromachining Processes
  In: Micromachines (2015), p. 1914-1922
  DOI: 10.3390/mi6121462
  URL: http://www.mdpi.com/2072-666X/6/12/1462
• Alexeev I, Quentin UH, Leitz KH, Strauß J, Baum M, Stelzle F, Schmidt M:
  Optical trap assisted sub diffraction limited laser structuring
  Berlin: Walter de Gruyter GmbH & Co KG, 2015
  Optically Induced Nanostructures: Biomedical and Technical Applications
  ISBN: 978-3-11-035432-4
• Baum M, Bechtold P, Strauß J, Schmidt M:
  Towards Dynamic Holographic Laser Beam Shaping
  In: Journal of Laser Micro Nanoengineering (2015), p. 216-221
  DOI: 10.2961/jlmn.2015.02.0020
• Berger S, Oefele F, Schmidt M:
  Laser transmission welding of carbon fiber reinforced thermoplastic using filler material: A fundamental study
  In: Journal of Laser Applications (2015), p. S29009
  DOI: 10.2351/1.4906391
  URL: http://dx.doi.org/10.2351/1.4906391
• Bishitz Y, Ozana N, Beiderman Y, Tenner F, Schmidt M, Mico V, Garcia J, Zalevsky Z:
  Noncontact optical sensor for bone fracture diagnostics
  In: Biomedical Optics Express (2015), p. 651-7
  DOI: 10.1364/BOE.6.000651
• Chen C, Ahmed M, Klämpfl F, Stelzle F, Schmidt M:
  A novel microfluidic model to mimic turbid nature and microvasculature of cutaneous tissue for optical imaging experiments
  In: Proceedings- Spie the International Society for Optical Engineering (2015)
  DOI: 10.1117/12.2203446
• Chen C, Klämpfl F, Kanawade R, Riemann M, Knipfer C, Stelzle F, Schmidt M:
  Recovering the superficial microvascular pattern via diffuse reflection imaging: phantom validation
  In: Biomedical Engineering Online (2015), p. 87 - 101
  DOI: 10.1186/s12938-015-0081-x
• Domke M, Felsl D, Rapp S, Sotrop J, Huber H, Schmidt M:
  Evidence of Pressure Waves in Confined Laser Ablation
  In: Journal of Laser Micro Nanoengineering (2015), p. 119-123
  DOI: 10.2961/jlmn.2015.02.0002
• Hohmann M, Lengenfelder B, Kanawade R, Klämpfl F, Schmidt M:
  Extension of depth-resolved reconstruction of attenuation coefficients in optical coherence tomography for slim samples
  (2015)
  DOI: 10.1117/12.2205030
  URL: http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=2475806
• Huis in 't Veld B, Overmeyer L, Schmidt M, Wegener K, Malshe AP, Bartolo P:
  Micro additive manufacturing using ultra short laser pulses
  In: CIRP Annals - Manufacturing Technology (2015), p. 701-724
  DOI: 10.1016/j.cirp.2015.05.007
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84940039537&origin=inward
• Häfner T, Heberle J, Dobler M, Gränitz M, Alexeev I, Schmidt M:
  Friction Adjustment within Dry Deep Drawing by Locally Laser Textured Tool Surfaces
  In: Key Engineering Materials (2015), p. 57-64
• Häfner T, Heberle J, Holder D, Schmidt M:
  Adjustment of surface energy on steel surfaces due to CLP generation by picosecond laser processing
  (2015)
• Kanawade R, Lengenfelder B, Menezes TM, Hohmann M, Kopfinger S, Hohmann T, Grabiec U, Klämpfl F, Menezes JG, Waldner M, Schmidt M:
  Improved cancer diagnostics by different image processing techniques on OCT images
  In: Proceedings- Spie the International Society for Optical Engineering (2015)
  DOI: 10.1117/12.2183838
• Karg M, Ahuja B, Schaub A, Schmidt J, Sachs M, Mahr A, Wiesenmayer S, Wigner L, Wirth KE, Peukert W, Merklein M, Schmidt M:
  Effect of process conditions on mechanical behavior of aluminium wrought alloy EN AW-2618 additively manufactured by Laser Beam Melting in powder bed
  (2015)
  URL: http://www.wlt.de/lim/Proceedings/Stick/4.html
• Karg M, Ahuja B, Schmidt M:
  Strategy towards tailored high-performance metal materials for additive manufacturing
  (2015)
  URL: http://www.iws.fraunhofer.de/en/events/archive_2015/additive_manufacturing_2015/proceedings.html
• Laukart A, Dobler M, Kohl S, Fritsche H, Grohe A, Kruschke B, Schmidt M:
  Energy efficient laser beam welding of metals with a ultra-high brightness direct-diode laser system
  Energy Efficiency in Strategy of Sustainable Production
  2015
  ISSN: 1660-9336
  DOI: 10.4028/www.scientific.net/AMM.805.162
  URL: http://www.scientific.net/AMM.805.162
• Laumer T, Stichel T, Riedlbauer DR, Amend P, Mergheim J, Schmidt M:
  Realization of multi-material polymer parts by simultaneous laser beam melting
  In: Journal of Laser Micro Nanoengineering (2015), p. 140-147
  DOI: 10.2961/jlmn.2015.02.0006
• Peukert W, Blümel C, Sachs M, Laumer T, Winzer B, Schmidt J, Schmidt M, Wirth KE:
  Increasing flowability and bulk density of PE-HD powders by a dry particle coating process and impact on LBM processes
  In: Rapid Prototyping Journal (2015), p. 697-704
  DOI: 10.1108/RPJ-07-2013-0074
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84944896896&origin=inward
• Rapp S, Heinrich G, Wollgarten M, Huber HP, Schmidt M:
  Physical mechanisms of SiNx layer structuring with ultrafast lasers by direct and confined laser ablation
  In: Journal of Applied Physics (2015), p. 105304
  DOI: 10.1063/1.4914457
  URL: http://dx.doi.org/10.1063/1.4914457
• Scheitler C, Hugger F, Hofmann K, Hentschel O, Bätzler T, Roth S, Schmidt M:
  Experimental investigation of direct diamond laser cladding in combination with high speed camera based process monitoring
  (2015)
  URL: http://icaleo2015.conferencespot.org/
• Strauß J, Baum M, Alexeev I, Schmidt M:
  Optical Trap Assisted Nanopatterning: Process Parallelisation and Dynamic Structure Generation
  (2015)
• Tenner F, Berg B, Brock C, Klämpfl F, Schmidt M:
  Experimental approach for quantification of fluid dynamics in laser metal welding
  In: Journal of Laser Applications (2015), p. S29003
  DOI: 10.2351/1.4906302
• Tenner F, Brock C, Klämpfl F, Schmidt M:
  Analysis of the correlation between plasma plume and keyhole behavior in laser metal welding for the modeling of the keyhole geometry
  In: Optics and Lasers in Engineering (2015), p. 32-41
  DOI: 10.1016/j.optlaseng.2014.07.009
• Tenner F, Elz D, Zalevsky Z, Schmidt M:
  Optical Tremor Analysis with the Speckle Imaging Technique
  In: Journal of Imaging Science and Technology (2015), p. 104021--104026
  DOI: 10.2352/J.ImagingSci.Technol.2015.59.1.010402

2014

• Ahuja B, Karg M, Nagulin K, Schmidt M:
  Laser beam melting of high strength al-uminium alloys EN AW-6061 and EN AW-6082
  Ljubljana (2014)
• Ahuja B, Karg M, Nagulin K, Schmidt M:
  Fabrication and Characterization of High Strength Al-Cu alloys Processed Using Laser Beam Melting in Metal Powder Bed
  In: Physics Procedia (2014), p. 135-146
  DOI: 10.1016/j.phpro.2014.08.156
  URL: http://www.sciencedirect.com/science/article/pii/S1875389214003010
• Ahuja B, Schaub A, Karg M, Lechner M, Merklein M, Schmidt M:
  Developing LBM process parameters for Ti-6Al-4V thin wall structures and determining the corresponding mechanical characteristics
  In: Physics Procedia (2014), p. 90-98
  DOI: 10.1016/j.phpro.2014.08.102
  URL: http://www.sciencedirect.com/science/article/pii/S1875389214002478
• Baum M, Strauß J, Grüßel F, Alexeev I, Schmidt M:
  Generation of phase-only holograms by laser ablation of nanoparticulate ITO layers
  In: Journal of Optics (2014), p. 125706
  DOI: 10.1088/2040-8978/16/12/125706
• Brock C, Hohenstein R, Schmidt M:
  Mechanisms of vapour plume formation in laser deep penetration welding
  In: Optics and Lasers in Engineering (2014), p. 93-101
  DOI: 10.1016/j.optlaseng.2014.02.001
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84897704554&origin=inward
• Chen C, Klämpfl F, Knipfer C, Riemann M, Kanawade R, Stelzle F, Schmidt M:
  Preparation of a skin equivalent phantom with interior micron-scale vessel structures for optical imaging experiments
  In: Biomedical Optics Express (2014), p. 3140-3149
  DOI: 10.1364/BOE.5.003140
  URL: https://www.osapublishing.org/boe/fulltext.cfm?uri=boe-5-9-3140&id=299700
• Chen C, Klämpfl F, Stelzle F, Schmidt M:
  Mapping the microvascular and the associated absolute values of oxyhemoglobin concentration through turbid media via local off-set diffuse optical imaging
  In: Proceedings- Spie the International Society for Optical Engineering (2014)
  DOI: 10.1117/12.2071572
• Dobler M, Hüttner S, Gürtler FJ, Tenner F, Klämpfl F, Schmidt M:
  Stereoscopic observation of spatter and tracer particle movement in laser beam welding
  (2014)
• Domke M, Nobile L, Rapp S, Eiselen S, Sotrop J, Huber H, Schmidt M:
  Understanding thin film laser ablation: The role of the effective penetration depth and the film thickness
  In: Physics Procedia (2014), p. 1007-1014
  DOI: 10.1016/j.phpro.2014.08.012
• Gürtler FJ, Karg M, Dobler M, Kohl S, Tzivilsky I, Schmidt M:
  Influence of powder distribution on process stability in laser beam melting: Analysis of melt pool dynamics by numerical simulations
  (2014)
  URL: http://sffsymposium.engr.utexas.edu/sites/default/files/2014-087-Guertler.pdf
• Heberle J, Klämpfl F, Alexeev I, Schmidt M:
  Ultrashort Pulse Laser Cutting of Intraocular Lens Polymers
  In: Journal of Laser Micro Nanoengineering (2014), p. 103-107
  DOI: 10.2961/jlmn.2014.02.0005
• Heberle J, Klämpfl F, Alexeev I, Schmidt M:
  Ultrakurz-gepulstes Laserstrahlschneiden biokompatibler Kunststoffe
  Meisenbach GmbH Verlag
  Bamberg (2014)
  URL: http://lef.info/lef2014.html
• Heitmanek M, Dobler M, Graudenz M, Perret W, Göbel G, Schmidt M, Beyer E:
  Laser brazing with beam scanning: Experimental and simulative analysis
  Elsevier
  (2014)
  DOI: 10.1016/j.phpro.2014.08.076
  URL: https://www.scopus.com/inward/record.url?partnerID=HzOxMe3b&scp=84923203863&origin=inward
• Hohmann M, Devrient M, Klämpfl F, Roth S, Schmidt M:
  Simulation of Light Propagation within Glass Fiber Filled Thermoplastics for Laser Transmission Welding
  (2014)
• Kanawade R, Klämpfl F, Riemann M, Knipfer C, Tangermann-Gerk K, Schmidt M, Stelzle F:
  Novel method for early signs of clinical shock detection by monitoring blood capillary/vessel spatial pattern
  In: Journal of Biophotonics (2014), p. 841-9
  DOI: 10.1002/jbio.201300065
• Karg M, Ahuja B, Hentschel O, Schmidt M:
  Local Hardness Variation of Ti50Cu32Ni15Sn3 Processed by Laser Beam Melting (LBM)
  In: International Journal of Recent Contributions from Engineering, Science & IT (2014), p. 34-38
  DOI: 10.3991/ijes.v3i1.4293
  URL: http://online-journals.org/index.php/i-jes/article/view/4293/3411
• Karg M, Ahuja B, Kuryntsev S, Gorunov A, Schmidt M:
  Processability of high strength Aluminium-Copper alloys AW-2022 and 2024 by Laser Beam Melting in Powder Bed
  (2014)
  URL: http://sffsymposium.engr.utexas.edu/sites/default/files/2014-036-Karg.pdf
• Karg M, Ahuja B, Kuryntsev S, Schmidt M:
  Laser Beam Melting of Amorphous Metals
  (2014)
  URL: http://icat.rapiman.net
• Klocke F, Klink A, Veselovac D, Aspinwall DK, Soo SL, Schmidt M, Schilp J, Levy G, Kruth JP:
  Turbomachinery component manufacture by application of electrochemical, electro-physical and photonic processes
  In: CIRP Annals - Manufacturing Technology (2014), p. 703-726
  DOI: 10.1016/j.cirp.2014.05.004
  URL: http://dx.doi.org/10.1016/j.cirp.2014.05.004
• Kohl S, Hugger F, Mann V, Schmidt M:
  Towards numerical determination of distortion in laser welding
  BIAS
  Bremen (2014)
• Mehari FA, Rohde M, Knipfer C, Kanawade R, Klämpfl F, Adler W, Stelzle F, Schmidt M:
  Laser induced breakdown spectroscopy for bone and cartilage differentiation - ex vivo study as a prospect for a laser surgery feedback mechanism
  In: Biomedical Optics Express (2014)
• Mikschl F, Baum M, Heberle J, Alexeev I, Schmidt M:
  The influence of laser induced consolidation on the ablation threshold of nanoparticulate ITO-layers
  In: Physics Procedia (2014), p. 991 – 997
  DOI: 10.1016/j.phpro.2014.08.010
• Paulus J, Tong J, Hornegger J, Schmidt M, Eskofier B, Michelson G:
  Extended stereopsis evaluation of professional and amateur soccer players and subjects without soccer background
  In: Frontiers in psychology (2014)
  DOI: 10.3389/fpsyg.2014.01186
• Plettke R, Schaub A, Gröschel C, Scheitler C, Vetter M, Hentschel O, Ranft F, Merklein M, Schmidt M, Drummer D:
  A new process chain for joining sheet metal to fibre composite sheets
  In: Key Engineering Materials (2014), p. 1468-1475
  DOI: 10.4028/www.scientific.net/KEM.611-612.1468
• Rapp S, Rosenberger J, Domke M, Heise G, Huber H, Schmidt M:
  Ultrafast pump-probe microscopy reveals the mechanism of selective fs laser structuring of transparent thin films for maskless micropatterning
  In: Applied Surface Science (2014), p. 368-372
  DOI: 10.1016/j.apsusc.2013.11.086
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84890970241&origin=inward
• Roos C, Schmidt M:
  Remote Laser Welding of zinc coated steel sheets in an edge lap configuration with zero gap
  In: Physics Procedia (2014), p. 535-544
  DOI: 10.1016/j.phpro.2014.08.025
• Sachs M, Hentschel O, Schmidt J, Karg M, Schmidt M, Wirth KE:
  Production of Al/Cu-Particles and their potential for processing by Laser Beam Melting (LBM)
  In: Physics Procedia (2014), p. 125-134
  DOI: 10.1016/j.phpro.2014.08.155
  URL: http://www.sciencedirect.com/science/article/pii/S1875389214003009
• Schaub A, Ahuja B, Karg M, Schmidt M, Merklein M:
  Fabrication and Characterization of Laser Beam Melted Ti-6Al-4V Geometries on Sheet Metal
  (2014)
  URL: http://www.ddmc-fraunhofer.de/
• Stein S, Heberle J, Gürtler FJ, Cvecek K, Roth S, Schmidt M:
  Influences of Nozzle Material on Laser Droplet Brazing Joints with Cu89Sn11 Preforms
  In: Physics Procedia (2014), p. 709-719
  DOI: 10.1016/j.phpro.2014.08.078
  URL: http://www.sciencedirect.com/science/article/pii/S1875389214002235
• Stein S, Heberle J, Hugger F, Roth S, Schmidt M:
  Düsenbasiertes Laserstrahl-Löten mit Formteilen zur hochtemperaturfesten Kontaktierung piezokeramischer Substrate
  Meisenbach
  Bamberg (2014)
  URL: http://www.lef.info/lef2014.html
• Strauß J, Alexeev I, Cvecek K, Schmidt M:
  Konfokale Bestimmung der Fokuslage und Kalibriermethodiken entsprechender Systeme
  Meisenbach GmbH
  Bamberg (2014)
• Tenner F, Berg B, Brock C, Klämpfl F, Schmidt M:
  An experimental approach for quantification of fluid dynamics in laser metal welding
  Proceedings of the ICALEO 2014
  Laser Institute of America, 2014
• Tenner F, Brock C, Gürtler FJ, Klämpfl F, Schmidt M:
  Experimental and Numerical Analysis of Gas Dynamics in the Keyhole During Laser Metal Welding
  In: Physics Procedia (2014), p. 1268--1276
  DOI: 10.1016/j.phpro.2014.08.050

2013

• Alexeev I, Strauß J, Gröschl AC, Cvecek K, Schmidt M:
  Laser focus positioning method with submicrometer accuracy
  In: Applied Optics (2013), p. 415-421
  DOI: 10.1364/AO.52.000415
• Amend P, Hentschel O, Scheitler C, Baum M, Heberle J, Roth S, Schmidt M:
  Fast and Flexible Generation of Conductive Circuits
  In: Journal of Laser Micro Nanoengineering (2013), p. 276-286
  DOI: 10.2961/jlmn.2013.03.0015
  URL: http://www.jlps.gr.jp/jlmn/upload/b9e3a7c5b186909a8dca1665dec97e38.pdf
• Baum M, Alexeev I, Latzel M, Christiansen S, Schmidt M:
  Determination of the effective refractive index of nanoparticulate ITO layers
  In: Optics Express (2013), p. 22754--22761
  DOI: 10.1364/OE.21.022754
• Baum M, Kim H, Alexeev I, Piqué A, Schmidt M:
  Generation of transparent conductive electrodes by laser consolidation of LIFT printed ITO nanoparticle layers
  In: Applied Physics A-Materials Science & Processing (2013), p. 799--805
  DOI: 10.1007/s00339-013-7646-y
• Baum M, Polster S, Jank M, Alexeev I, Frey L, Schmidt M:
  Laser melting of nanoparticulate transparent conductive oxide thin films
  In: Journal of Laser Micro Nanoengineering (2013), p. 144-148
  DOI: 10.2961/jlmn.2013.02.0005
• Bechtold P, Hohenstein R, Schmidt M:
  Beam shaping and high-speed, cylinder-lens-free beam guiding using acousto-optical deflectors without additional compensation optics
  In: Optics Express (2013), p. 14627-14635
  DOI: 10.1364/OE.21.014627
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84879334076&origin=inward
• Bechtold P, Hohenstein R, Schmidt M:
  Evaluation of disparate laser beam deflection technologies by means of number and rate of resolvable spots
  In: Optics Letters (2013), p. 2934-2937
  DOI: 10.1364/OL.38.002934
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84882285105&origin=inward
• Brock C, Tenner F, Klämpfl F, Hohenstein R, Schmidt M:
  Detection of weld defects by high speed imaging of the vapor plume
  In: Physics Procedia (2013), p. 532-536
  DOI: 10.1016/j.phpro.2013.03.113
• Cvecek K, Strauß J, Alexeev I, Miyamoto I, Schmidt M:
  Practical Aspects of Surface Generated Third Harmonic for Highly Precise Beam-workpiece Alignment
  In: Journal of Laser Micro Nanoengineering (2013), p. 201-205
  DOI: 10.2961/jlmn.2013.03.0003
• Dobler M, Leitz KH, Otto A, Schmidt M:
  Simulation of process dynamics in laser beam brazing
  (2013)
  URL: https://www.lia.org/store//ICA13_406
• Gürtler FJ, Karg M, Leitz KH, Schmidt M:
  Simulation of laser beam melting of steel powders using the three-dimensional volume of fluid method
  In: Physics Procedia (2013), p. 881-886
  DOI: 10.1016/j.phpro.2013.03.162
• Heberle J, Klämpfl F, Alexeev I, Schmidt M:
  Ultrafast Laser Surface Structuring of Intraocular Lens Polymers
  In: Journal of Laser Micro Nanoengineering (2013), p. 51-55
  DOI: 10.2961/jlmn.2013.01.0011
• Hohenstein R, Tenner F, Brock C, Schmidt M:
  A Method to Remotely Measure Amplitudes of Surface Vibrations with a Conventional Michelson Interferometer
  (2013)
• Häfner T, Reg Y, Hetzner H, Schmidt M:
  Microstructuring tools for sheet bulk metal forming - a designated application for picosecond laser
  In: Journal of Laser Micro Nanoengineering (2013), p. 39-44
  DOI: 10.2961/jlmn.2013.01.0009
• Kanawade R, Mehari FA, Klämpfl F, Rohde M, Knipfer C, Tangermann-Gerk K, Adler W, Schmidt M, Stelzle F:
  Qualitative tissue differentiation by analysing the intensity ratios of atomic emission lines using laser induced breakdown spectroscopy (LIBS): prospects for a feedback mechanism for surgical laser systems
  In: Journal of Biophotonics (2013), p. 153-61
  DOI: 10.1002/jbio.201300159
• Kanawade R, Mehari FA, Knipfer C, Rohde M, Tangermann-Gerk K, Schmidt M, Stelzle F:
  Pilot study of LIBS for tissue differentiation by monitoring the plume created during laser surgery - an approach on a feedback Laser control mechanism
  In: Spectrochimica Acta Part B-Atomic Spectroscopy (2013)
  URL: http://www.sciencedirect.com/science/article/pii/S0584854713001158
• Karg M, Laumer T, Schmidt M:
  Additive Manufacturing of Gradient and Multimaterial Components
  (2013)
  URL: http://conferences.sun.ac.za/index.php/doie/coma13/paper/viewFile/370/303
• Kohl S, Schmidt M:
  Numerical Analysis of the Influence of Beam Characteristics onto the Process Dynamics during Laser Cutting
  Omnipress
  (2013)
• Leitz KH, Tsai YC, Flad F, Schäffer E, Quentin UH, Alexeev I, Fardel R, Arnold CB, Schmidt M:
  Multiphoton polymerization using optical trap assisted nanopatterning
  In: Applied Physics Letters (2013)
  DOI: 10.1063/1.4811704
• Müller M, Peter S, Berg S, Heinrich M, Walther M, Hohlfeld K, Heberle J, Quentin UH, Koriath HJ, Gebhardt S, Schmidt M, Michaelis A, Kroll L, Richter F, Neugebauer R:
  Microstructured piezoceramic and fibre composite transducers for active semi-finished products
  Univ
  Chemnitz (2013)
• Paulus J, Hornegger J, Schmidt M, Eskofier B, Michelson G:
  An evaluation system for stereopsis of beach volleyball players measuring perception time as a function of disparity within a virtual environment
  In: Journal of Vision (2013), p. 1171
  DOI: 10.1167/13.9.1171
• Quentin UH, Heberle J, Held C, Schmidt M:
  Laser Droplet Brazing for Electrical Contacting of Composite Materials with Integrated Active Elements
  In: Procedia Materials Science (2013), p. 181-188
  DOI: 10.1016/j.mspro.2013.02.022
  URL: http://www.sciencedirect.com/science/article/pii/S2211812813000230
• Tenner F, Brock C, Hohenstein R, Zalevsky Z, Schmidt M:
  Remote Optical Detection of the Fusion State in Laser Deep Penetration Welding
  In: Physics Procedia (2013), p. 508--512
  DOI: 10.1016/j.phpro.2013.03.109

2012

• Baum M, Polster S, Jank M, Alexeev I, Frey L, Schmidt M:
  Efficient laser induced consolidation of nanoparticulate ZnO thin films with reduced thermal budget
  In: Applied Physics A-Materials Science & Processing (2012), p. 269-273
  DOI: 10.1007/s00339-012-6871-0
• Bechtold P, Bauer D, Schmidt M:
  Beam Profile Deformation of Fs-Laser Pulses During Electro-optic Scanning with KTN Crystals
  In: Physics Procedia (2012), p. 683-692
  DOI: 10.1016/j.phpro.2012.10.089
• Bechtold P, Mayer G, Luehring P, Schmidt M:
  Novel System Technology for Trepanning a Laser Beam at Arbitrary Developments of Angle of Incidence and Lateral Focus Position
  In: Key Engineering Materials (2012), p. 238-243
  DOI: 10.4028/www.scientific.net/KEM.523-524.238
• Cvecek K, Miyamoto I, Strauß J, Bui V, Scharfenberg S, Frick T, Schmidt M:
  Strength of Joining Seams in Glass Welded by Ultra-fast Lasers Depending on Focus Height.
  In: Journal of Laser Micro Nanoengineering (2012), p. 68-72
  DOI: 10.2961/jlmn.2012.01.0013
• Domke M, Rapp S, Schmidt M, Huber H:
  Ultra-fast movies of thin-film laser ablation
  In: Applied Physics A-Materials Science & Processing (2012), p. 409-420
  DOI: 10.1007/s00339-012-7072-6
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84870244574&origin=inward
• Domke M, Rapp S, Schmidt M, Huber HP:
  Ultrafast pump-probe microscopy with high temporal dynamic range
  In: Optics Express (2012), p. 10330-10338
  DOI: 10.1364/OE.20.010330
  URL: http://dx.doi.org/10.1364/OE.20.010330
• Franke J, Schmidt M, Hubert M, Risch F, Tremel J, Hofmann B:
  Laserschneiden in der Elektroblechfertigung
  In: ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb (2012), p. 642-646
• Held C, Quentin UH, Heberle J, Gürtler FJ, Weigl M, Schmidt M:
  Laser Droplet Brazing for the Electrical Contacting of Composite Materials with Integrated Active Elements
  In: Physics Procedia (2012), p. 585-593
  DOI: 10.1016/j.phpro.2012.10.077
  URL: http://www.sciencedirect.com/science/article/pii/S1875389212026041
• Häfner T, Reg Y, Hetzner H, Schmidt M:
  Mikrostrukturierung von Werkzeugstählen mittels Ultrakurzpulslasern
  Meisenbach Verlag Bamberg
  Bamberg (2012)
• Kanawade R, Stelzle F, Schmidt M:
  In Vivo Monitoring of Hemodynamic Changes during Clogging and Unclogging of Blood Supply for the Application of Clinical Shock Detection
  In: Physics Procedia (2012), p. 823-829
  DOI: 10.1016/j.phpro.2012.10.106
• Laumer T, Karg M, Schmidt M:
  Laser beam melting of multi-material components
  In: Physics Procedia (2012), p. 518-525
  DOI: 10.1016/j.phpro.2012.10.068
  URL: http://www.sciencedirect.com/science/article/pii/S1875389212025953
• Leitz KH, Koch HM, Otto A, Maaz A, Löwer T, Schmidt M:
  Numerical Simulation of Drilling with Pulsed Beams
  In: Physics Procedia (2012), p. 881-892
  DOI: 10.1016/j.phpro.2012.10.113
• Leitz KH, Koch HM, Otto A, Schmidt M:
  Numerical simulation of process dynamics during laser beam drilling with short pulses
  In: Applied Physics A-Materials Science & Processing (2012), p. 885-891
  DOI: 10.1007/s00339-011-6702-8
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84858862608&origin=inward
• Leitz KH, Quentin UH, Alexeev I, Schmidt M:
  Process investigations of optical trap assisted direct-write microsphere near-field nanostructuring
  In: CIRP Annals - Manufacturing Technology (2012), p. 207-210
  DOI: 10.1016/j.cirp.2012.03.047
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84861631215&origin=inward
• Paulus J, Hornegger J, Schmidt M, Eskofier B, Michelson G:
  A Virtual Environment Based Evaluating System for Goalkeepers’ Stereopsis Performance in Soccer
  (2012)
  URL: http://www5.informatik.uni-erlangen.de/Forschung/Publikationen/2012/Paulus12-AVE.pdf
• Schmidt M, Dobler M, Kohl S, Gürtler FJ, Leitz KH, Otto A:
  Multi-physical modeling of laser material processing - process analysis and optimization
  (2012)
• Strauß J, Cvecek K, Gröschl AC, Alexeev I, Schmidt M:
  Focus Alignment Method for Laser Manufacturing at Sub-micron Positional Accuracy
  In: Physics Procedia (2012), p. 800-806
  DOI: doi:10.1016/j.phpro.2012.10.103
• Tsai YC, Leitz KH, Fardel R, Otto A, Schmidt M, Arnold CB:
  Parallel optical trap assisted nanopatterning on rough surfaces
  In: Nanotechnology (2012)
  DOI: 10.1088/0957-4484/23/16/165304
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84859322461&origin=inward
• Tsai YC, Leitz KH, Fardel R, Schmidt M, Arnold CB:
  Generating Nanostructures with Multiphoton Absorption Polymerization using Optical Trap Assisted Nanopatterning
  In: Physics Procedia (2012), p. 669-673
  DOI: 10.1016/j.phpro.2012.10.087

2011

• Bartkowiak K, Ullrich S, Frick T, Schmidt M:
  New developements of laser processing aluminium alloys via additive manufacturing technique
  (2011)
• Baum M, Alexeev I, Schmidt M:
  Laser Treatment of ITO and ZnO Nanoparticles for the Production of Thin Conducting Layers on Transparent Substrates
  In: Journal of Laser Micro Nanoengineering (2011), p. 191--194
  DOI: 10.2961/jlmn.2011.03.0003
• Brock C, Hohenstein R, Schmidt M:
  Towards fast tracking of the keyhole geometry
  (2011)
  DOI: 10.1016/j.phpro.2011.03.087
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=79959408474&origin=inward
• Cvecek K, Miyamoto I, Strauß J, Wolf M, Frick T, Schmidt M:
  Sample preparation method for glass welding by ultrashort laser pulses yields higher seam strength
  In: Applied Optics (2011), p. 1941-1944
  DOI: 10.1364/AO.50.001941
• Eiselen S, Zimmermann CG, Bechtold P, Schmidt M:
  Experimental studies on joining thin silver foils by recrystallization using ultrashort laser pulses
  In: Physics Procedia (2011), p. 358-365
  DOI: 10.1016/j.phpro.2011.03.144
• Heberle J, Klämpfl F, Quentin UH, Alexeev I, Schmidt M:
  Picosecond laser ablation behavior of IOL-materials
  (2011)
• Hohmann M, Douplik A, Varadhachari J, Nasution A, Mudter J, Neurath M, Schmidt M:
  Preliminary results for hyperspectral videoendoscopy diagnostics on the phantoms of normal and abnormal tissues: towards gastrointestinal diagnostics
  (2011)
• Koch HM, Kägeler C, Otto A, Schmidt M:
  Analysis of welding zinc coated steel sheets in zero gap configuration by 3D simulations and high speed imaging
  In: Physics Procedia (2011), p. 431-439
  DOI: 10.1016/j.phpro.2011.03.153
• Leitz KH, Redlingshöfer B, Reg Y, Otto A, Schmidt M:
  Metal ablation with short and ultrashort laser pulses
  In: Physics Procedia (2011), p. 230-238
  DOI: 10.1016/j.phpro.2011.03.128
• Li L, Hong M, Schmidt M, Zhong M, Malshe AP, Huis in 't Veld B, Kovalenko V:
  Laser nano-manufacturing - State of the art and challenges
  In: CIRP Annals - Manufacturing Technology (2011), p. 735-755
  DOI: 10.1016/j.cirp.2011.05.005
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=80051665433&origin=inward
• Otto A, Koch HM, Leitz KH, Schmidt M:
  Numerical Simulations - A Versatile Approach for Better Understanding Dynamics in Laser Material Processing
  In: Physics Procedia (2011), p. 11-20
  DOI: 10.1016/j.phpro.2011.03.003
• Schmidt M, Zimmermann M, Hohmann M, Paulus J:
  Photonics in medicine -From diagnostics to training
  (2011)
• Wolynski A, Herrmann T, Schmidt M, L'Huillier J:
  Picosecond Laser Ablation of Carbon Fiber Reinforced Plastics at Different Wavelengths
  (2011)

2010

• Bechtold P, Eiselen S, Schmidt M:
  Influence of electrostatic fields and laser-induced discharges on ultrashort laser pulse drilling of copper
  In: Physics Procedia (2010), p. 525-531
  DOI: 10.1016/j.phpro.2010.08.176
• Koch HM, Leitz KH, Otto A, Schmidt M:
  Laser Deep Penetration Welding Simulation Based on a Wavelength Dependent Absorption Model
  In: Physics Procedia (2010), p. 309-315
  DOI: 10.1016/j.phpro.2010.08.057
• Otto A, Schmidt M:
  Towards a universal numerical simulation model for laser material processing
  In: Physics Procedia (2010), p. 35-46
  DOI: 10.1016/j.phpro.2010.08.120
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=79551657870&origin=inward
• Pitz I, Otto A, Schmidt M:
  Simulation of the Laser Beam Forming Process with Moving Meshes for Large Aluminium Plates
  In: Physics Procedia (2010), p. 363-369
  DOI: 10.1016/j.phpro.2010.08.063
• Schmidt M, Kolleck R, Grimm A, Veit R, Bartkowiak K:
  Direct laser deposition of Cu alloy on forming tool surfaces: Process window and mechanical properties
  In: CIRP Annals - Manufacturing Technology (2010), p. 211--214
  DOI: 10.1016/j.cirp.2010.03.071